Scientific presentations

The oral sessions will take place from 18th to 20th June. The oral presentations include keynotes, invited lectures, and short oral presentations.

  • Keynotes will last 45 minutes.

  • Invited lectures will last 20 minutes.

  • Short oral communications will last 15 minutes.

The scheduled times incorporate a few minutes for discussion.


Poster presentations!

In addition to oral presentations, poster communications are planned. Throughout the event, they will be exhibited at the conference venue, located in the Auditorium of the University of Milan Visit the 'Program' page to download the poster session details!

Keynote Speakers

PB
Patrycja BoberInstitute of Macromolecular Chemistry, Czech Academy of Sciences, Czech RepublicConducting polymers aerogels and carbogels: preparation and applications
ED
Enrico DalcanaleUniversity of Parma, ItalyNon-covalent dynamic polymer networks
CD
Claudio De RosaUniversity of Naples "Federico II", ItalyFrom polyolefins to sustainable polymers through molecular catalysis: a tool for polymer engineering
RN
Renaud NicolaÿÉcole supérieure de physique et de chimie industrielles de la Ville de Paris, FranceUsing phase separation to design recyclable and self-healing materials

Invited Speakers

RC
Roberta CavalliUniversity of Turin, ItalyPolysaccharides for the design of fast and sustained release buccal films
FC
Francesco CellesiPolytechnic University of Milan, ItalyPolymer design for cell and drug microencapsulation
DC
Delphine Chan-SengUniversité de Strasbourg, CNRS, FranceMacromolecular engineering to tune materials for biomedical applications
ED
Elise DeniauLe Mans Université, FranceCore-shell microgel@MOF colloids for selective CO2 capture
MD
Monika Dobrzynska-MizeraPoznan University of Technology, PolandAnalysis of in vivo bioresorption kinetics in advanced polylactide-based composites
AE
Antonella EspositoUniversity of Rouen, FranceCritical cooling rate of fast-crystallizing polyesters: the example of poly (alkylene trans-1,4-cyclohexanedicarboxylate)
PG
Prokopios GeorgopanosHelmholtz-Zentrum Hereon, GermanySustainable polymer synthesis supported by digital twins for composite and membrane applications
LG
Laure GibotUniversité de Toulouse, CNRS, FrancePolymer nanovectors to improve efficacy of photodynamic therapy: applications to antitumor strategies and regenerative medicine
MG
Marc GuerreUniversité de Toulouse, CNRS, FranceDisulfide-based vitrimers: from mechanistic insight to industrial implementation
EG
Elena Guillen-BurriezaPolytechnic University of Catalonia, SpainPolymeric materials and membrane distillation, it´s a match!
TK
Theodora Krasia-ChristoforouUniversity of Cyprus, CyprusFunctionalized polymer-based fibrous materials by means of electrospinning
SL
Sonia LanzalacoPolytechnic University of Catalonia, SpainBiopolymers and electrochemistry: a powerful duo for sustainable development
AL
Anna Li VolsiExactmer Ltd, UKLiquid phase manufacture of exact polymers
YM
Yoshi MarienGent University, BelgiumThe strength of multi-scale in silico tools for polymer design and recycling
NM
Nicolò MauroUniversity of Palermo, ItalyInterconnected hybrid nanogel network for precision Breast Cancer Ablation: combining multimodal imaging, sensing, and phototherapy
DM
Damien MontarnalUniversité de Lyon 1, CNRS, FranceImproving high shear processability of dynamic covalent networks
MP
Maria Conceição PaivaUniversity of Minho, PortugalPEEK composites with carbon nanoparticles: processing, properties and functionalities
CP
Carlo PirolaUniversity of Milan, ItalyExperimental study and artificial intelligence modeling of solvent separation processes for the sustainable recycling of polyamide-based textile waste
DP
Daniel PortinhaUniversité de Lyon 1, INSA Lyon, FranceChemical strategies towards “greener” silicone polymers and materials
SP
Sílvia Pérez-RafaelPolytechnic University of Catalonia, ItalyBiomass-derived polymers and their valorization for eco-friendly material design
JR
Jean RaynaudUniversité de Lyon 1, CNRS, FranceEco-design and circularity for silicones
AS
Andreia SousaUniversity of Aveiro, PortugalGreener solvent-driven strategies for closed-loop recycling of complex polymers
LV
Luca ValentiniUniversity of Perugia, ItalySilk engineering: innovating new materials
IZ
Izabela ZaborniakRzeszow University of Technology, PolandDesigning drug delivery systems by atom transfer radical polymerization
LD
Louis de SmetWageningen University, The NetherlandsPolyester-based polyelectrolyte complexes

Speakers

MA
Monica ArgenzianoUniversity of Turin, ItalyPolysaccharide-shelled nanobubbles as innovative nanoplatform to overcome cancer chemoresistance
MA
Matteo ArioliUniversity of Milan, ItalyEnhancing the fire resistance of cotton fabrics through targeted chemical functionalization
TB
Tiziana BardelliNETZSCH-Gerätebau GmbH, Verona, Italy Understanding and optimizing the quality of recycled polypropylene (PP) through thermal analysis and rheology
FB
Federica BertocchiniUniversity of Milan, ItalyPlastic degradation by wax worm enzymes: molecular insights from structural analysis
IB
Irene BonadiesItalian National Research Council - IPCB, ItalyDesigning 3D-Structures based on Electrospun Nanofibers for Biomedical applications
CB
Cesare BussiUniversity of East Piedmont, ItalyOptimisation of synthesis parameters to enhance textural properties of HCPs derived from polystyrene waste
DC
Daniele CallegariUniversity of Pavia, ItalyMulti-hydrogen bond-based self-healing polymer separator for next-generation lithium batteries
AC
Alessandro CoattiUniversity of Bologna, ItalyFuran-based polyester with inherent antimicrobial properties for automotive applications
MC
Marco ColettiWaters – TA Instruments, ItalyHigh temperature fatigue performance evaluation of fibre-reinforced polymer (FRP) composites utilizing monotonic, and dynamic mechanical analysis characterization
ND
Nicola D'AvanzoUniversity of Catanzaro "Magna Graecia", ItalyElectrospun polymeric membranes with embedded nanovesicles for topical inflammation treatment
FF
Federica FerrutiLignoflow Technologies AB, Stockholm, SwedenLignin as platform material for safe and sustainable built environments
NG
Nébéwia GriffeteSorbonne University, FranceMolecularly imprinted polymer for cancer imaging and therapy
MK
Małgorzata KlamutRzeszow University of Technology, PolandShedding new light on novel photocatalytic systems for photo-mediated atom transfer radical polymerization
LM
Lorenza MaddalenaPolytechnic University of Turin, ItalyPolyelectrolytes complexation as structural tool for the preparation of self-standing and flame retardant bio sourced composites
FM
Federica MorettiUniversity of Trieste, ItalyOptimizing injection molding of polymeric nanocomposites via d-optimal design of experiments
MP
Michele PierigéItalian National Research Council - ICCOM, ItalyProbing cotton’s thermo-oxidative behavior: a joint solid-state NMR and EPR investigation
AR
Andrea RispoUniversity of Naples "Federico II", ItalyCompatibilization of isotactic polypropylene (iPP) and polyethylene (PE) with PP-based block copolymers
LR
Laura RivaPolytechnic University of Milan, ItalyTurning textile waste into high-performance nanostructured cellulose-based aerogels for clean water
AR
Arianna RossettiPolytechnic University of Milan, ItalyHarnessing polyethyleneimine in 3D-printing for tunable heterogeneous catalysts
OS
Orlando SantoroUniversity of Insubria, ItalyTuning thermal and mechanical properties of ABA copolymers from elastomers to thermoplastics
AT
Arianna TauroUniversity of TrentoDevelopment of eco-sustainable fully bio-based multifunctional compounds and textiles
ST
Sofia TreccaniUniversity of Milan, ItalyPolyamidoamine-based photostabilizers for cotton fabrics
FV
Francesco ValentiniUniversity of Trento, ItalyRecycling of phenolic resins for household applications
MV
Matteo VenturiUniversity of Bologna, ItalyNon-isothermal crystallization of biobased aromatic polyesters: the role of different diacid subunits
HZ
Hui ZhaoPolytechnic University of Turin, ItalyCrystallization of polycaprolactone within nanopapers based on graphene-related materials

Poster Presenters

VB
Veronica BalzanoUniversity of Salerno, ItalySynthesis of bio-based non-isocyanates polyurethanes
EF
Ermelinda FallettaUniversity of Milan, ItalySuper absorbent polymers for future agriculture: a circular approach for soil fertilization and irrigation
TF
Thai Ferreira Da SilvaSão Paulo State University, BrazilUse of hybrid buckpapers of carbon nanotubes and graphene nanoplatelets as resistive element for curing of fiberglass/epoxy resin composites
MG
Mariarosa Carmen GambardellaUniversity of Salerno, ItalyStereoselective (co)polymerization of 1-vinylcyclohexene (VCH) and the (S)-4-isopropenyl-1-vinyl-1-cyclohexene (IVC) promoted by titanium complexes with [OSSO]-type ligands
SG
Stefano GazzottiUniversity of Milan, ItalyCovalent Organic Frameworks: from non-processable powders to plastic materials through a polymer-supporting strategy
MK
Monika KnitterPoznan University of Technology, PolandThe influence of the incubation process on the properties of bioresorbable polymer composites
LL
Laura LongoniSharebot srlSeparating critical elements from a NdFeB magnet with aminophosphonic acid functionalised 3D printed filters and their detailed structural characterisation with Xray tomography
MM
Mattia ManfroniUniversity of Bologna, ItalyProgress in the eco-design of biobased copolymer systems for packaging applications
MO
Marco Aldo OrtenziUniversity of Milan, ItalyActivated benzaldehyde-DOX monomers from biobased α-hydroxy fatty acids as comonomers for L-lactide bulk Ring Opening Polymerization
IS
Ivan StefanovićUniversity of Belgrade, SerbiaPolyurethane composites based on TiO2 nanoparticles: hydrophobicity and swelling behavior
FS
Federico StucchiPolytechnic University of Milan, ItalyAdvanced polymer nanoparticles in clinical research and regulatory considerations